
The Arccaptain IGBT Inverter DC TIG Welder TIG200 offers dual-voltage 120/220-volt input power, letting you weld just about anywhere. It has a compact design, weighing only 12 lbs. When you’re ready to bring the power, strength, and craftsmanship of true TIG welding to your home, this 200 amp DC TIG welder is the most cost-effective option.
ARCCAPTAIN Powerful and Easy-to-handle High Frequency 200Amp TIG Welding Machine
·Large LED Display: Unique LED screen design provides precise data display, making it easier and clearer to read.
·Lightweight and Portable: Weighing only 12 pounds, the welder allows the end user to easily move it by the handle or shoulder strap.
·Remote Control: Supports TIG welding with a foot pedal as needed (foot pedal with 5-pin plug is compatible and needs to be purchased separately).
·Easy to Use: Suitable not only for hobbyists or beginners but also for professional work.

ARCCAPTAIN 2 in 1 HF TIG/STICK/MMA TIG Welder
·Stick Mode: Locate the ground clamp with cable and connect the plug on the cable end to the Negative Connector (–) on the welder.
·TIG Mode: Locate the ground clamp with cable and connect the plug on the cable end to the Positive Connector (+) on the welder.







High performance 110 & 220V Dual Voltage TIG Welder Machine
·Dual Voltage 110V/220V: Suitable for various working environments.
·60% Rated Duty Cycle: Ensure long-time welding.
·DC TIG welding 15-200 amps is very suitable for both thin and thick workpieces.
·Superior MMA Welding features hot start, arc force, anti-stick.
·2T/4T welding match your different needs,4T is suitable for continuous long-term welding.
·Suitable wide range of tasks: can weld steel/stainless steel/carbon/iron.
·Easy arc ignition, litter spattering, stable current and good shaping.
·Quality by Reliable Testing System: Certified as an audited lab by TüV Rheinland and as a Testing Facility for Witnessed Manufacturers's Testing by CSA.

High Frequency Arc Starting
·High frequency TIG start allows the arc success rate of the TIG to be almost 100%, providing an easy arc start, stable current, good shaping, ensuring clean and beautiful welds.

Fan on Demand & Energy-saving
·Smart cooling fan system runs only when needed, so there are no constant buzzing sounds. It's also energy-saving.
·Safety: Automatic protection function for over-current, over-voltage, over-heating, and over-load protection.

Suitable for Various Thicknesses of Metal
·Suitable for stainless steel, alloy steel, low carbon steel, copper, iron, etc.
·TIG: Can weld stainless steel up to 13/64 inch (5mm).
·STICK: Can weld up to 13/64 inch (5mm) plate.

What's in the box
·1 * ARCCAPTAIN 200 Amp TIG Welder
·1 * 13ft WP-17 TIG Torch
·1 * 10ft Ground Clamp
·1 * 10ft Electrode Holder
·1 * Conversion Adapter
·1 * 8ft Argon Gas Hose (with connector)
·1 * Brush & Hammer
·1 * Tungsten Electrode
·1 * Shoulder Strap
·1 * User Manual

ARCCAPTAIN TIG Welder 200amp was passed various authoritative Laboratory tests in simulating extremely harsh environments that conform to the high standards. The lab was Certified as an audited lab by TüV Rheinland and as a Testing Facility for Witnessed Manufacturers's Testing by CSA.

2 Years Warranty
·Within the warranty periods, ARCCAPTAIN will repair or replace any warranted parts or components that fail due to such defects in meterial or workmanship.