!!Before buying 【Style C】, please scroll down to the bottom and read the product introduction carefully!!

Product Description

Brake Bleeder check valve- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle, Car Clutch 【Non-automotive accessories】

Step1: Open

1. Open the brake bleeder nipple of the caliper

Step2: Connect the Hose

1. Place one end of the vbaxy hose onto the bleed nipple and secure with hose clip(only recommend)

2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper

Step 3. Release and start press the brake Lever

3.1 Loose the brake bleeder Screw a little

3.2 Start pressing the brake Lever SLOWLY

3.3 Check until all air bubble has been flushed out

3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill

3. The style B package also includes 2 pcs of brake bleeder screw caps

【Style C】

Products Includes: 1 Set Brake fluid replacement tool (Including 2 pcs Joint + 1 pc Hook). If you have the slightest problem with our product, please feel free to give us a message and we will help you solve your problems as soon as possible.