10" Mid-Range Airway Buffing Wheels For Metal Polishing

Balanced. Durable. Perfectly Versatile.

Crafted from 100% cotton cloth and a special twill-style weave, these thick and durable Mid-Range Airway Buffing Wheels bridge the gap between a second-stage coloring wheel and a third-stage fine finishing wheel. Designed for detailers and polishers who demand both strength and finesse, these Mid-Range Airway Buffing Wheels deliver a consistent, controllable cut with a smooth finish.

The Mid-Range Airway Buffing Wheels are best paired with our Yellow Deluxe, True Green, Wild Berry, or any of our other Coloring Compounds for Metal Polishing.

The tightly woven cotton construction gives this wheel exceptional durability and resilience under heat and pressure, while maintaining the flexibility needed to produce an even, swirl-free shine.

Its balanced density makes it ideal for intermediate polishing stages — removing light lines and haze left from aggressive cutting wheels and preparing the surface for high-gloss finishing.

Recommended Uses:

·Ideal for aluminum, stainless steel, brass, and copper

·Best suited for intermediate polishing stages

·Perfect when paired with Coloring Compounds or Medium Rouges

The Mid-Range Airway Buffing Wheels should be used between 2,200 and 3,200 RPM based on the wheel size.

For reference, below is a table showing the maximum safe operating speed for each size of buffing wheel:

Airway Buffing Wheels should ALWAYS be mounted with a set of safety flanges to reinforce the center of the buffing wheel.

You use the edge of the buffing wheel to polish? 

Yes! Edge buffing is a technique commonly used in conjunction with an angle grinder, a buffing wheel, and compound. Achieve a shiny, polished edge effortlessly. See below:

 

Pro tip: Always rake your buffing wheels.

How do I use a Buffing Wheel Rake?

The buffing wheel should be spinning at it’s normal speed and the  Buffing Wheel Rake should be held securely when held up to a stationary bench grinder or lathe. On a grinder, please exercise caution when raking. We recommend using your feet to hold the Buffing Wheel Rake to the ground and holding the angle-grinder to it.

Why should I use a Buffing Wheel Rake? 

Raking your buff removes hardened and burned on polishing and buffing compound from the edges of your buffing wheel. Compound build up can reduce the efficiency of the buffing wheel while also creating a rougher surface. If you notice a significant decrease in the residual metal dust produced when buffing, rake the buffing wheel and reapply a small amount of metal polishing compound.

What Polisher/Grinder Goes best with these buffing wheels? 

MAKITA 9237C- The best 3,500 RPM polishing machine (PROS & BEGINNERS) 

MAKITA GA7021 - The best 6,000 RPM polishing machine (PROS) 

What are the safety requirements for buffing wheels & metal polishing? 

We HIGHLY recommend that you use a full face respirator mask! This FULL FACE RESPIRATOR MASK  is highly recommended and great quality.