Machine Mart Sandblaster

Mechanical Hardware for sandblasting metal, wood, or masonry surfaces.

Featured brands
Authenticated productsVerified shops

Introduction

Sandblasters propel abrasive media at high pressure to strip paint, rust, or grime from metal parts and masonry. Gravity-feed or pressure-pot models from Machine Mart suit DIY workshops and light restoration work.

  • Nozzle sizes matched to the chosen abrasive grit
  • Air-compressor requirements listed for each unit
  • Protective hoods and gloves to contain rebounding media

Always wear eye and respiratory protection during operation.

FAQs

Most hobby sandblasters require at least 5-7 CFM at 80-90 PSI; check the unit’s specifications before purchase.

Glass bead or aluminum oxide works well on metal; avoid sand on automotive panels to prevent warping.

Yes, collect and screen spent media to remove debris; replace when it becomes dull or contaminated.

Work inside a cabinet blaster or use a dust-collection attachment connected to a shop vacuum.

Water traps and inline filters prevent clumping of abrasive and extend the life of the nozzle.