Why did the motor suddenly stop working?

1. The fruit or vegetables have been juiced.

2. The filter has too much pulp, causing the machine to malfunction.

3. Due to overheating during operation, the built-in safety feature — the overheat protection mechanism — is triggered, and the motor stops running.

4. Product malfunction.If the above issues have been ruled out, there may be a fault with the motor or other internal components.

How to solve the problem of the motor suddenly stopping?Please try the following:

1. Turn off the power and check if there is a large amount of residue in the filter. Clean the residue thoroughly and try again. Also, avoid placing fruits with little juice, such as bananas or pears, on their own. These fruits can produce a lot of pulp and block the machine.

2. If the machine overheats unexpectedly, it will automatically stop working and wait for it to cool down gradually. Once cooled, it can resume normal operation.

3. Check if food is stuck at the bottom of the pusher.

4. Never pour liquid into the machine while it is running.

Why is there a lot of noise while juicing?

1. The machine parts are not installed correctly.

2. Too much fruit in the machine causes excessive pulp, which clogs the filter.

Some actions that can be taken to reduce the noise emitted by the machine during operation:

1. Check if all parts are assembled correctly according to the manual.

2. Check if the filter is clogged. If it is, turn off the power and clean the clogged parts.

3. Select the correct speed setting for the machine based on the characteristics of the fruits being used:

The juicer have three grades. The O grade is pause.

The i grade is for soft fruit such as cucumbers and watermelons,

The ll grade is for hard fruit such as apples and carrots.

Other correct usage methods:

1. Continuation working hour no more than i min, if it works for 1 min should be break 2 min for nextiob

2. Please remove the large kemel and thick fruit skin before using the juicer.

3. Make sure unit and parts are completely dry then store in a cool dry place.

4. Do not put any fruit or vegetables into your machine until power is turned on.

5. Allow unit to run for at least 10 seconds before juicing.

If the above steps do not resolve the issue or if there are any other problems, please contact customer service first.