Description

EASY ON THE INSTALL AND THE WALLET.

Transform your vehicle's presence on the road with the Conductor's Special 232 Train Horn Kit. Priced with the discerning driver in mind, this kit is tailored to sync flawlessly with our innovative Spare Tire Delete Bracket. At its core is the Shocker XL train horn, emanating authentic, robust notes reminiscent of real train horns. Supported by a resilient 2-gallon air tank and the trusted HornBlasters 3Q air compressor, you're ensured 3-5 seconds of honk time, with a rapid recovery of under two minutes.

No more enduring lengthy installations. Our Spare Tire Delete Brackets, ideal for most full-size and mid-size trucks, revolutionize the setup process. By replacing the standard spare tire, these brackets facilitate a sleek installation, reducing time from an exhaustive 6-8 hours to a mere 3-4 hours.

·Bracket Excellence: Crafted from robust 14-gauge steel and protected by a two-stage powdercoat, ensuring longevity and a sleek appearance.

·Make Your Presence Known: With a sound that reverberates for miles, this kit ensures your vehicle stands out in any crowd.

·Complete & Ready-to-Install Kit: Everything you need from start to finish is included, ensuring a smooth setup and letting you honk with confidence in no time.

·Weather-Resistant Design: This kit is built to brave the elements, ensuring reliable performance regardless of the conditions.

·Robust Horn Construction: Crafted from fiberglass-reinforced ABS combined with stainless steel internals, these horns guarantee both longevity and unparalleled sound clarity.

Important Notes:

·Fits most full-size pickups. 

·The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.

·Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.

·VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.

Includes

·Shocker XL train horns

·Spare Tire Delete bracket

·HornAir 2-gallon 6 port air tank

·hornblasters 3q air compressor

·110/150 PSI pressure switch w/ 40 amp relay

·Remote mountable intake filter assembly

·Spare air filter elements

·10ft of 5/16" D.O.T. approved air line

·17ft of 1/2" D.O.T. approved air line

·6ft of 3/8" air line (for air compressors air intake)

·22ft of 10-gauge red wire

·22ft of 18-gauge blue wire

·22ft of 18-gauge grey wire

·Black Widow 1/2" NPT stainless steel electric air valve

·HornBlasters 200 PSI stainless steel liquid-filled air gauge

·Brass NPT fittings kit including a safety blow-off & drain cock

·Complete wiring kit with fuse holder & fuses

·Mounting hardware

·Air line cutter

·Earplugs

·Detailed instructions

Specifications

·Part Number: HK-S4-232-STDK

·Honk Time: 3-5 Seconds

·Operating Pressure: 150 PSI

·Restart Pressure: 110 PSI

·Voltage: 12-Volt DC

·Max Amperage: 20A

·Horn: Shocker XL Train Horn

·Horn Material: High-impact Fiberglass Reinforced ABS

·Horn Measurements:- Horn #1: 19.50″ (495.30 mm)- Horn #2: 16.25″ (412.75 mm)- Horn #3: 14.75″ (374.65 mm)- Horn #4: 12.75″ (323.85 mm)

·Horn Flare: 5"

·Air Tank: 2-Gallon 6 Port Air Tank

·Tank Length: 17" (431.8 mm)

·Tank Diameter: 6" (152.4 mm)

·Tank Height (With Legs): 7" (177.8 mm)

·Air Compressor: 3Q Air Compressor

·Compressor Length: 10.1" (256.54 mm)

·Compressor Width: 4.5" (114.3 mm)

·Compressor Height: 7" (177.8 mm)

·Bracket Length: 19" (482.6 mm)

·Bracket Width: 19" (482.6 mm)

·Bracket Height: 7.5" (190.5 mm)

·Bracket Weight: 6 lbs (2.72 kg)

·Assembled Length: 21" (533.4 mm)

·Assembled Width: 23" (584.2 mm)

·Assembled Height: 13" (330.2 mm)

·Assembled Weight: 40 lbs (18.14 kg)

Policies & Warranty Information

·Money-Back Guarantee/Refund Policy: All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.

·Warranty: Our Shocker XL train horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer's defect warranty!

·HornBlasters.com Satisfaction Guarantee: HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.

·Cross-Shipments: HornBlasters.com will not cross-ship returned merchandise.

·Physical Damage Policy: Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.