The Battery Tender PowerTender® selectable 10 AMP / 2 AMP smart battery charger and maintainer provides high-performance charging for 12V batteries in automotive, powersports, and marine environments. Choose 10 AMPs for fast charging or 2 AMPs for low power maintenance and storage. Compatible with Standard (sealed or flooded lead acid), AGM, GEL, and Lithium batteries, making this charger a true multi-chemistry workhorse for all your battery maintenance. Spark-proof, reverse hookup protection, and fully automatic provide a safe and hassle free charing solution.  The added power supply feature helps users maintain electronic settings in their vehicles while changing batteries or doing vehicle diagnostics by providing clean constant power to the ECU.

The 10Amp Power Tender® makes for a versatile charger for automotive, commercial, and marine / outdoor vehicles.  The unit is mountable, IP67, and vibration resistant to allow for permanent installation.

Highlights

·Multi-Output: 10 AMP or 2 AMP selectable (12V)

·Built-in 8 AMP 12V power supply for higher accessory loads, maintaining system voltage during diagnostics, and preventing ECU memory loss during service

·Chemistry compatibility: standard (sealed or flooded lead acid), AGM, GEL, lithium

·IP67 waterproof

·Operating temp: -4 °F to 104 °F (-20 °C to 40 °C)

·Includes alligator clip and ring terminal combo harness with 15 AMP fuse and 3 year limited warranty

Cables and Size

·AC power cord: 6 ft, 16 AWG

·DC output cord: 6 ft, 16 AWG

·DC accessory: 0.5 ft, 16 AWG

·Total reach: over 12.5 ft

·Dimensions: 10 in × 4.74 in × 2.33 in

·Weight: 2.64 lb (charger only)

Compatible Accessories & Cables

·Included Cable: Alligator clips and ring terminal combo with a threaded screw-lock connector (designed for higher amperage).

·Replacement Harness: 081-0210 ring terminal harness, which includes a 15 AMP, 32V glass fast-acting fuse.

·Compatible Extensions: 081-0207-5 (5 ft) and 081-0208-10 (10 ft), the same extensions used with Battery Tender PowerPlus and WaveCharge Pro chargers.

·Fuse Note: To replace the fuse, unscrew the connector collar counter-clockwise, remove the old fuse, and install a new 15 AMP, 32V glass fast-acting fuse.

Certifications BC, cETLus (UL1236), DOE, FCC, ICES