1PC/2PCS 6x9 Inch 600W Full-Range Car Speakers 4Ohm 60W RMS 93dB SPL for Cars Trucks Buses Audio Coaxial Speaker Subwoofer

Features:

Powerful Sound Output: With a peak power of 600W and an RMS power of 60W, these speakers deliver dynamic, distortion-free audio. The 93dB sensitivity ensures crisp, loud sound even with factory head units, while the frequency response of 60Hz~20kHz reproduces deep bass and clear highs with accuracy. Built for Durability & Stability: The die-cast aluminum frame minimizes unwanted resonance for cleaner sound, while the large ferrite magnet and high heat-dissipation voice coil ensure consistent performance even during prolonged high-power use, preventing overheating and failure. Low Distortion Audio: With total harmonic distortion (THD) below 1%, enjoy every note with crystal-clear clarity, free from muffled or distorted sound at any volume level.

Features:

Color: Black Impedance: 4Ω Distortion: Less Than 1% MAX.POWER: 600 W RMS.POWER: 60 W SPL: 93dB Frequency Response: 60Hz~20kHz Voltage: 12V~24V Item Size: 6''x9'' Inch Material Type: Metal & Magnet Speakers Types: Full-range Speakers Applicable models: Universal Car, Truck, Bus, etc

1PC-600W:

Package: 1*Speaker

2PCS-600W:

Package: 2*Speaker

Universal Compatibility & Easy Installation

Standard 6''×9'' Form Factor: Fits most factory 6x9-inch mounting locations, making it ideal for cars, trucks, buses, and other vehicles. 4Ω Impedance: Matches seamlessly with most factory head units, aftermarket radios, and amplifiers, eliminating the need for complex wiring or additional components. 12V-24V Compatibility: Works with both standard 12V car systems and 24V truck/bus electrical systems, offering versatility for a wide range of vehicles. All Hardware Included: Comes with mounting hardware and wire terminals for a straightforward DIY installation, no professional tools required.

Installation Instructions:

To protect the vehicle, cover it with a dust cloth. Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door. Remove the original car horn first fix the gasket on the original car horn. 1. To protect the vehicle, add a dust cloth to the vehicle 2. Remove the door panel (trim panel) 3. Remove the original car speaker 4. Fix the speaker bracket 5. Fix the speaker crossover 6. Connect the speaker terminals 7. Fix the speaker to the bracket 8. Connect the cross connection to the speaker wiring 9. Remove the original car speaker and replace the speaker 10. The reset and replacement of the door panel is completed

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car. 2. Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine. 3. The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud. 4. There will be murmurs and buzzing when the reconfiguration process is not connected correctly. 5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud. 6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. 7. Please allow 1-2cm measuring deviation due to manual measurement.