All products sold in our store do not include tax; tax will be added when invoicing.Please consult customer service for details!

1.How to properly inflate?

1.Before refilling, use a small tool to press down on the refill valve and completely release the remaining gas inside, so as to eliminate the pressure in the lighter's gas tank

2.Press the outlet of the gas-filled canister vertically downward for about 5 seconds each time, repeating two or three times

3.Please wait for about 3-5 minutes after inflating before using it.If there is still no ignition after 5 minutes, please turn the adjustment valve a bit larger (Note the + -) direction

For more details, please see the following detailed introduction

Special reminder: In high-altitude areas above 1000m meters, inflatable windproof straight-flame lighters may be affected.The ignition rate may decrease significantly, so please choose windproof straight-flame lighters carefully.Preferably use open flame or kerosene lighters

2.Instructions for using a kerosene lighter:

Note: New kerosene lighters do not contain fuel and must be refueled before use.They are available in our store under the kerosene accessories category

Refueling steps:

1.Open the cover;

2.Remove the movement;

3.Turn it upside down, open the bottom cotton pad, or inject kerosene through the hole in the bottom cotton pad

4.After refueling, insert the casing, and it is ready for use

5.Note that it should be filled to 80% capacity only; do not overfill to the point of overflowing.Please be careful when igniting for the first time, as oil spillage may cause the entire device to catch fire

Special reminder: Dealers should not refill kerosene lighters when they are not being sold or used.Refilling the lighter will cause the cotton wick to turn black and look like an old lighter, which customers cannot accept.Additionally, not using the lighter after refilling will cause the ignition rate to decrease, making it difficult to light in the future

Important reminder: The presence of rust inside the case is a common and normal phenomenon, caused by the chemical agents left behind during the surface processing.Additionally, during daily use, frequent insertion and removal can cause friction, and a rougher internal structure is beneficial for securing the movement and preventing it from becoming too loose.Therefore, we do not specifically polish the inside of the movement.If you encounter a situation where the movement is loose, please remove the movement, gently tap the bottom side of the movement, and then reinsert it

3.Rechargeable Lighter

Currently, there are two main types of rechargeable lighters on the market: electric heating wire lighters and arc pulse lighters

The charging time for a rechargeable lighter is approximately 2 hours.It is usually charged through a USB cable interface and can be charged with universal phone chargers, car chargers, and computer USB ports, etc.Some also have a built-in USB port for direct charging

2. Generally, about 2-3 packs can be used. Once the battery runs out, simply recharge it, which is simple, convenient, and quick