Kennards Floor Sander

Polishers for refinishing wooden floors with a Kennards floor sander.

Featured brands
Authenticated productsVerified shops

Columbia Sander
9 sold
$32.45
No more products

Introduction

A Kennards floor sander helps restore wood floors by removing old finishes and leveling surfaces before staining or sealing.

  • Drum or orbital action determines how aggressively material is removed from hardwood.
  • Dust collection ports connect to shop vacuums to limit airborne particles during sanding.
  • Variable speed controls let users adjust pressure for edges versus open floor areas.

Choose the right abrasive grit sequence for a smooth, even result.

FAQs

Start with 36 or 40 grit to strip finish, move to 60 or 80 grit, then finish with 100 or 120 grit for a smooth surface ready for stain.

Yes, but use a lower speed and finer grits to avoid sanding through the thin veneer layer on engineered boards.

Connect a 1-1/4 inch or 2-inch hose from a shop vacuum to the sander’s dust port; seal any gaps with tape to improve suction.

Wear a dust mask rated N95 or higher, safety goggles, and hearing protection, especially in enclosed rooms.

Replace when the abrasive appears glazed or clogged; continuing with a worn belt can burn the wood or leave swirl marks.