IRobot Bags

iRobot bags are Clean Base dirt-disposal pouches that catch debris when a Roomba empties.

Introduction

iRobot bags are dock dust pouches, not travel totes. The Clean Base the robot bin into a sealed bag; a full or missing bag lights a red LED and stops emptying. Card shape and bag generation must match your dock.

  • Plastic-card evac bag for classic i, s, j, and Essential docks versus the larger cardboard bag on newer LiDAR robots
  • 3-pack versus 12-pack based on how often the dock fills in a pet home
  • Collar that slides on guide rails versus a zipper bag that the dock cannot detect

Match series letter (i, j, s, Combo, Essential) and bag collar style on two listings. Skip luggage and vacuum bags cut for upright canisters.

FAQs

Classic i, s, j, Essential, and Combo 10 Max docks use the plastic-card bag. Newer LiDAR robots on the later Home app use a larger cardboard evac bag. Mixing them can leave the dock unable to detect a bag. Check the robot series on the dock label.

Lift the Clean Base lid, pull the plastic card straight up so the bag self-seals, drop it in household trash, and slide a new collar into the rails until it seats. Close the lid firmly. A solid red light often means the bag is full or not detected.

iRobot describes weeks of debris, and some packs say up to about two months depending on floor dirt and pets. Homes with shedding dogs fill faster. Replace when the dock light says so, not on a fixed calendar.

The stock bag is designed to seal and toss. Reusable zipper aftermarket bags exist but must still present a collar the dock can sense. If the robot stops emptying after a reuse hack, the sensor is the usual culprit.

Bags sit in the dock. The robot still uses a filter and brushes. A refill kit may bundle bags with filters and edge brushes. If suction at the robot drops, the onboard filter is a separate SKU from the dock bag.