Specifications:

Name: leather strap cutter

Material: aluminum alloy

Usage: leather cutting strips

Size: 120mm x120mm x 86mm (length*width*height)

Cutting Width range: ≤65mm

Features：

1. Manual Leather Strap Cutter: Equipped with 10 black sharp blades, 1 G clip, 8 hex wrenches, easy to adjust & replace, no need to purchase additional accessories; The cutter plate size is L120 x W120 x H86mm.

2. The width of the leather can be cut

3. Easy to Operate: You can hold the machine by hand or fix it on the table with C clips to pull out the leather.

4. The Leather Belt cutter applicable leather materials have vegetable-tanned leather, bridle leather, belt leather, hard leather, thick leather, etc.

5. High Material: This leather manual cutting machine is made of stainless steel and aluminum alloy, with a smooth surface, good texture and durability.

Notice about use：

Proficiency will affect the effect. At the beginning of use, you may feel a little difficult to operate and uneven belt width. This is a normal phenomenon. Please follow the video operation tutorial. before operation, please cut the original leather edges to keep straight, then keep stable during operation. Pull along the leather edge and practice more times. The width will be very uniform. If you have any problems in use, please leave a message to us.

The machines are not high-precision equipment, there may be slight machining marks and small bumps on the surface.

The size is measured manually,Please understand there may be an error of 1-3mm.

Package includes：

1 x Leather Cutting Machine ;  

10 x Blades;  

1 x C-clamps;  

2 x Wrenches

Adjustable Leather Strap Cutter

Thick & stable / Sharp & compact / Uniform width

Easy to cut belt strap：

Applicable: vegetable-tanned leather, bridle leather, belt leather, hard leather, thick leather, etc.

Removing the screw can replace the blade.

This model uses a regular blade with a width of 18mm.

Can cut thick and hard leather, but not soft and thin leather.

The width of the leather can be cut

Usage method：

1. First fix the belt-cutting machine on the edge of the workbench and fix it with C-shaped clips.

2. Install the blade, break the blade to a suitable height, place it & tighten it with a hex wrench.

3. Loosen the screw & adjust the width of the strip, and tighten the screw with a wrench after fixing the position.

4. Adjust the height according to the thickness of the leather material.

5. After adjusting the push leather, it can be cut.

The machines are not high-precision equipment, there may be slight machining marks and small bumps on the surface.